For several seasons, we have seen how the kimono has become one of the favorite garments of bloggers around the world. Both in winter and summer, as a beach accessory on a bikini or with a shirt and jeans for an informal outing or, even, on an evening dress, this versatile piece of clothing seems to have arrived to stay in our dressing rooms. The process of making Kimono and yukata pattern are the same.
If you have not yet succumbed to the charm of these clothes of Japanese origin or have not found one that suits your style, you should know that, with a little interest, you can make this garment yourself and to your liking. If you want to learn how to make a kimono, you just have to follow the steps that we will show you. You may read also colors that go with a navy blue dress.
How to make a yukata pattern?
Before starting the preparation, you must have, in advance, the necessary materials. Learning how to make a yukata pattern is easy, but in addition, it can also be economical, although it will always depend on the type of fabric you choose. To start your yukata pattern, you will need:
2 meters of fabric if you want to make a short yukata pattern or 5 meters if you prefer a longer one: choose the fabric you like best (printed, plain, with geometric or floral patterns, etc.). Every season new trends emerge in both color and fabrics, so take advantage and get the most out of your yukata pattern with the proposals they will offer you in textile stores. Viscose or silk fabrics are usually recommended for their soft fall and for how easy it is to work with them.
Something more of cloth
We recommend that you always buy a little more to avoid staying halfway. In addition, if you have a scrap leftover, you can always make a turban or a fabric headband to match the yukata pattern to get a total look.
Satin ribbon cut at the bias
Choose the ribbon in question based on the pattern or color of the fabric you have selected for the yukata pattern. You can continue with the same color range to balance the set or acquire a different and groundbreaking color to give it originality.
Thread
the thread must be the same color as the fabric and must be of good quality to prevent breakage.
Pins
Pins are important to be able to hold the hems and pieces of your yukata pattern until you have seen them, so don’t forget them.
Sewing needle
While it is true that it can be done with a sewing needle, if you have a sewing machine, we recommend that you do it with it.
Other fundamental materials
Scissors are suitable for cutting cloth, adhesive for cloth, iron.
Make a long yukata pattern step by step
Long yukata patterns bring elegance when combined with a blouse and stylish pants. In addition, they are also ideal if you are at home and want to wear a comfortable garment without losing a touch of style. To learn how to make a long yukata pattern you must do, step by step, what we indicate below:
Join the patterns with adhesive or painter’s tape: it is best to borrow an already made yukata pattern and take out the measurements yourself, although you can also get ideas of yukata pattern patterns in magazines or on the Internet. However, here we provide you with the guidelines so that you can get a basic pattern and get down to work: cut 4 rectangular pieces of the length of your arms and the width you want (from the minimum measure +5 centimeters of your arm).
Then, cut two rectangular pieces by measuring the width of your back and the length you want your yukata pattern to reach the front and back. Short yukata patterns usually reach half a hip, while long ones reach to the knees or ankles.
Fold the chosen fabric in half, place the previously attached pattern with adhesive tape and attach it to the fabric with pins, thus joining the different parts of the yukata pattern that you will sew later.
Cut the pattern next to the fabric. Keep in mind that if you make your pattern yourself, you will have to have taken into account a seam allowance of a minimum of 3 centimeters wide.
Keep reading: Make baby headband and hairbands
Join the top of the two sleeves (the smallest rectangular pieces) to the shoulder of the yukata pattern (the largest rectangular piece) with a needle and thread, making simple stitching that joins the fabric, but is not definitive.
Next, join the sides of the yukata pattern and the bottom of each sleeve.
If you want to make hems on the sleeves and hems to make it more elegant, you can sew both parts with the needle and thread or use a fabric adhesive, because, with the heat of the iron, it will make you achieve the same effect.
Sew the bias tape on the front of the yukata pattern and the neck, creating a kind of flaps. If you wish, you can cut a ribbon about 20 or 20 cm wide and make a small hem, so you can tie the yukata pattern as a sash or belt.
Kimono or Yukata pattern
The short kimono is used in Japan for formal ceremonies and very special occasions. Its inclusion in the catwalks has turned it into a garment both to wear on important occasions and to wear in more informal situations. Due to the fabric used and its use in the west, the short kimono is more similar to the piece of clothing known as yukata. Yukata, although it may seem similar at first glance, has characteristics that make it different from the typical Japanese kimono:
The fabric
Yukata is usually made of cotton and not silk (as is the case with traditional Japanese yukata pattern).
For all types of occasions
Its social acceptance is very wide and is widely used as a casual garment for the most informal looks, as well as for more special occasions.
Perfect for summer
If yukata is a fabulous garment for the spring and summer months, it is due to cotton, as its light quality makes it a fresh and beautiful option.
The sash
The yukata usually wears a sash, not like the kimono that has two. However, due to the westernization of the piece, it may not have a sash.
Let’s see, then, a traditional kimono (left) made with silk and a yukata (right) made with cotton.
Make a short kimono step by step
In Japan, short kimonos are not common, but their commercialization in other countries has made their measures adapt to the preferences and needs of their buyers. Whether you like kimonos for women or men (today, a kimono is an equally interesting garment in a men’s closet), we are going to tell you how to make a short kimono step by step.
The materials that you are going to need are the same as for making a long kimono, but you will have to buy a third less fabric for the length and the sleeves (if you wish you can make them long, half sleeve or short sleeve style).
- Cut 2 large panels taking the back of the person who will wear the kimono as a measure and add 5cm to the seams.
- Cut out 4 smaller panels, taking the arms as a measure, and add 5 cm more.
- Join the 2 large panels by the shoulders, leaving a gap in the neck area and two in the shoulder area.
- Join the small panels in the shoulder area, forming the sleeves.
- Cut the hole in the neck area, giving it a curved shape.
- Then cut vertically and leave the same distance between the two sides; the large front piece down until it is fully open.
- Make hems on sleeves and hems to prevent the fabric from fraying.
- Make a belt or sash of the measure you want, taking the waistline as a measure to calculate the width and adding a minimum of 30 cm.
As you can see, the realization of a kimono or a yukata pattern, whether for men or women, requires some patience and a few hours of dedication. If you are fond of or fond of fashion and you like to make the first steps in the world of sewing.
